Jump to content

Levi

Members
  • Content count

    150
  • Joined

  • Last visited

  • Days Won

    1

Levi last won the day on October 15

Levi had the most liked content!

About Levi

  • Rank
    Advanced Member
  1. Tips: 1) Let the weight of the drill do the work 2) use adjustable torque chuck and set on lowest setting that allows the bit to turn under the weight of the drill 3) use a piece of acrylic and drill a hole through it the same size as the diamond hole saw to use as a guide to help keep your bit steady 4) use plumber putty between the acrylic guide and glass to provide a water damn, roll putty into a snake and circle the hole so that water will hold in the cavity between acrylic and glass 5) I slowly rock the drill in a circular motion so that the entire diamond bit isn’t against the glass at any one time, reducing the friction and heat generated 6) when using the above method make sure to understand that this should only be done on lowest torque setting so that if the bit binds it will not crack the glass 7) use low torque high speed setting on drill 8) I prefer to go as fast as possible speed wise on the drill, I typically stop and check my depth many times and slow down near the end. Make sure to use painters tape over the inside of the hole so the glass puck doesn’t fall before it’s completely cut. Also put a towel down on the other glass so any debris does not scratch the other glass. I’m happy to do it for you. I work tomorrow until 5pm but feel free to call or text me after. 937.760.9343 Sent from my iPhone using Tapatalk
  2. Outlaw, if you are in Lima, I have bits and have drilled probably 100 aquariums at least. Let me know if I can help. Glad to lend a hand. Sent from my iPhone using Tapatalk
  3. Thank you! Amazing deal! Sent from my iPhone using Tapatalk
  4. Yes still making them. $69 for 10g kits clear and black acrylic. Custom colors adds some to the cost depending on what you are looking for. Sent from my iPhone using Tapatalk
  5. 16 is so aggressive, what about using 40 instead since it’s an adhesive and not a solvent? Sent from my iPhone using Tapatalk
  6. No longer need any Sent from my iPhone using Tapatalk
  7. Ok sounds good I will text you for details Sent from my iPhone using Tapatalk
  8. I have Sunday off, would it work to swing by sometime after noon? Sent from my iPhone using Tapatalk
  9. I work till 5 Sent from my iPhone using Tapatalk
  10. I’m in Lima and will buy 1 tomorrow if it is still available Sent from my iPhone using Tapatalk
  11. It’s pretty quiet honestly, he is on here, just never really posts much. Sent from my iPhone using Tapatalk
  12. Made for a local Reefer and helped him get his Reeflo yellowtail up and running for his tank. He has a sweet setup and has been slowly making sure he has everything he can think of to make it successful and easy to maintain. Sent from my iPhone using Tapatalk
  13. Used an external pump to keep the kalk recirculating, can be setup with dosing pump ideally. Sent from my iPhone using Tapatalk
  14. Mixes clean and clear, the only salt I have ever liked that instantly mixed clean and clear was aqua medic salt straight from Germany Sent from my iPhone using Tapatalk
×