Jump to content
NBurg

Random equipment FS: 36" MH+T5, 30" Sump, overflows, return kits, return pump

Recommended Posts

Upgraded my tank so I have some equipment for sale.  Looking for cash only to help pay for the new setup. Will be posing picks soon,  some are drying off and some are still soaking in vinegar. Here is what I have:

1) 36" Hamilton Cebu Sun 250w MH fixture $500
- Single-end metal halide lamp with an electronic ballast to drive the radium bulb. also has x4 39w T5 lamps. 4 power cords, 1 MH, 2 for T5 (outer, inner) and the fan.  Comes with legs for a 36" tank or hooks for hanging.  I hung mine and can give you the stuff I used to hang it.  The Radium bulb was bought in September and only ran for 5 hours a day so you can get another 6mo to a year out of it if you run it short too.  The T5 bulbs are very new, with in the last 2 or 3 months.  I have x2 ATI blue+ and x2 Giesmann purples.  Fixture is $690 new plus shipping and tax comes out to $750 if you were to buy from Hamilton.  

2) Eshopps R-200 Sump 3rd gen. + Filter tube $160
- 30"L x 14"W x 16" H.  Very nice and quiet sump.  Can accept dual 1" overflows perfect for herbie system.  central chamber is unfiltered and meant for a fuge.  I used it as my skimmer section and the skimmer section as a frag area.  I also bought a custom 7" filter tube so no more filter socks.  can be used as a media or filter floss section.  I will include a brush to clean the underpass to the skimmer section.  has built in ATO float valve but I never used it.  Also the return pump section is not the biggest so larger return pumps wont fit.  most Sicce and DC pumps fit fine. 

3) Eshopps Eclipse M Overflow Box (kit) - $60
- low profile overflow box for up to 800gph.  drain area is on outside of tank, overflow box inside.  has dual drains and can be set up like a herbie system.  Very quiet!  I have one side plumbed with a gate valve and a strainer which I will include if you want it.  Also comes with the glass diamond tipped hole saw and hole saw guide so you can drill your tank.  

4) Glass Holes overflow box - $40
- 700gph.  has black overflow box lid and diamond tipped glass hole saw 

5) Glass Holes 3/4" return kit with lockline - $15
- comes with hole saw 

6) Sicce Syncra silent 2.0 568gph - $50
- used for about 2 years, works perfectly.  will keep if it doesnt sell since it the same pump my skimmer uses.  comes with all random adapters that came with it. 

7) 40g breeder - $20
- drilled for either of the overflow boxes above and return line. Free if you buy an overflow, return and sump.  There are some scratches on the back and sides, and a few on the front but last I checked, nothing more than light scratches from the mag cleaner.  
 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×