Jump to content

My 180 upgrade


Sevitz5
 Share

Recommended Posts

3 hours ago, crimsonvice said:

As long as your pump can handle the head pressure it should be fine. You may have to throttle the 1st return outlet a little with a ball valve to make flows even if you wanted, but I am sure you probably wont notice it much at all. 

I have the Neptune Cor-20 pump, so I’m thinking it will be fine. It’s only gonna have to lift the water about 2’

Link to comment
Share on other sites

  • 2 weeks later...

Well made some progress today. I got my frag tank located and mounted, I got my holes drilled through the wall for my return lines, and started welding up the brackets to hold my lights. I just need to weld a gusset on the brackets and get them powder coated. I picked up my Marco reef rock and am waiting on the E-Marco 400 mortar to assemble my aquascape.A88F453B-E7A5-46D4-A49D-87023F07C18D.thumb.jpeg.26469f17e49617d8065efc299336c701.jpeg04362A15-5BC2-41C4-8C47-3DB85819B1B3.thumb.jpeg.391f2d4826065daebf18382d9b54c976.jpeg4980A0DF-9BFC-4FA8-9AC6-1A3A3ACCB341.thumb.jpeg.70bbded78cb9ca9a5395064e7872719f.jpegDCC6513A-A35E-4C88-B05B-701FF66880E8.thumb.jpeg.265689ddf84d84a467d8abca2f178cea.jpeg

Link to comment
Share on other sites

Busy day today. I got the return line all plumbed, flow sensors installed, and manifold built. The valve on the end of the manifold will feed my frag tank. All that’s left is hook up the drains, brace under the house, and start getting her wet. D48CC488-0FD0-4DC6-B76C-EFCE596F167E.thumb.jpeg.b081d818786ad313f45caaa4e1b3aa87.jpeg

Edited by Sevitz5
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...