Jump to content

Help with ATO Setup


Jesse
 Share

Recommended Posts

I'm trying to set my ATO up with two sensors. Unlike the GHL video option of one switch is low level, and one is high level I want one low level and one emergency shut off.

I have one switch working as On/Off for the ATO but for the life of me I can't get the float switch to shut the ATO pump off when triggered.

My setup:
- Optical switch is the "ATO Sensor"
- Float switch is the "High Sump Sensor"
- Y cable is being used from the purple input

My programming:

 

ATO Sensor:


ATO Sensor.png

 

High Sump Sensor:


High Sump Sensor.png

 

Program Logic:


Program logic.png

 

Switch Channel 15:


switch channel 15.png

 

Socket 2:


socket 2.png

Link to comment
Share on other sites

Figured this issue out and will post a tutorial in the main forum. I had the Outlet set to "Fill Water ATO," when it should have been pointed to my "Programmable logic." I also didn't need the float switch inverted.

Link to comment
Share on other sites

  • 1 year later...
On 8/30/2020 at 10:12 PM, Tmcca said:

I know this thread is old but I am trying to setup my ATO. I have my ATO with Optical as well and when water is low I want it so it will not turn on my pump. You said you have figured it out. Do you have a tutorial for this?

He never made a tutorial. Only the screen shots above. 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...